banner
Introduction to Basic Knowledge of Slow Closing Check Valve
2022-12-07

Slow closing check valve, also known as check valve, is used to prevent the medium from flowing back in the pipeline. The opening and closing parts are opened or closed by the force of the medium flow. Check valves belong to the category of automatic valves, and are mainly used on pipelines with one-way flow of medium, and only allow the medium to flow in one direction to prevent accidents. This type of valve should generally be installed horizontally in the pipeline.


Structural Features

1. Short structure length, small size, light weight, convenient installation, sensitive action and good sealing performance.

2. Both horizontal and vertical pipelines can be used, the valve disc closes quickly, and the water hammer pressure is small.

3. The overall structure is simple and compact, with beautiful shape, smooth flow channel and small fluid resistance.

4. The stroke of the disc is short, the impact force of closing the valve is small, the service life is long and the reliability is high.


Installation Precautions

1. When placing the pipeline, care should be taken to make the passing direction of the slow closing check valve consistent with the flow direction of the fluid, and it should be installed in a horizontally placed pipeline.

2. Never connect slow closing check valve directly with other valves.

3. Avoid adding pipe joints and obstructions within the operating radius of the valve plate of the slow closing check valve.

4. When installing the slow closing check valve near the elbow, pay attention to leaving enough space.

Sealing Surface Leakage Prevention Measures

1. Improve the manufacturing quality, and use the slow closing check valve after the pressure test is qualified.

2. Periodic inspection and cleaning, slow closing check valve should not be used in media with a lot of sediment.

3. Correctly adjust the adjusting parts of the slow closing check valve so that the closing position is consistent with the position caused by the wrench.

Hot Products
Wafer Check Valve
API WCB 20" 300LB Dual Plate Wafer Check Valve
20" 300LB wafer check valve is made according to API 594 standard. Made by WCB, 20" 300LB wafer check valve has the structural characteristics of dual plate and built-in type. It has wafer type connection mode.
Wafer Check Valve
8" 150LB Dual Plate Wafer Check Valve API WCB
8" 150LB wafer check valve is made according to API 594 standard. Made by A216 WCB + 316, 8" 150LB wafer check valve has the structural characteristics of dual plate. It has wafer type connection mode.
Wafer Check Valve
API594 598 12" 150LB Dual Plate Wafer Check Valve Wafer (RF)
12" 150LB wafer check valve is made according to API 594 standard. Made by WCB+316, 12" 150LB wafer check valve has the structural characteristics of dual plate. It has wafer (RF) connection mode.
Wafer Check Valve
20" 600LB Dual Plate Wafer Check Valve LCC API594
20" 600LB wafer check valve is made according to API 594 standard. Made by A352 LCC, 20" 600LB wafer check valve has the structural characteristics of dual plate and built-in type. It has double flange RF connection mode.
get a quote
get a quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

products

about

contact